Alexandria, VA
EPS 29 was used for its lightweight characteristics at the pool deck. The easy to use, lightweight foam is placed beneath the concrete and paver flooring and used to build up the elevation to its desired height. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
Tysons Corner, VA
Large blocks of EPS 39 were provided to a returning client when they came to us looking for a large scale solution to precutting and providing custom blocks of EPS Geofoam. Our team was able to precut and draw each and every block of foam used to build up the slabs at the Fairfax, VA residential development.
Las Vegas, NV
The Monte Carlo hotel in Las Vegas, NV is building a new 5,000 seat theater and using Geofoam for various areas of slab build up and stadium seating. EPS blocks will be supplied in various thicknesses and accompanied by shop drawings for installation purposes. The theater is expected to be open and showing it first performances by the end of 2016.
Orlando, FL
A restaurant out of Florida was looking to build up the slab elevation on a project. EPS Geofoam was used because it is lightweight and easy to handle. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
Washington, DC
Approximately one truckload of EPS 12 was used for drop slab fill material at this university. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
Las Vegas, NV
EPS 19 was used here in 4x8x12” sheets to raise the elevation of a deck level in the high-rise. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
Hartford, CT
EPS Geofoam was provided to a returning client concrete subcontractor who knew of its lightweight characteristics and brought it to another project. EPS 29 was provided to fill in the floor slab of a middle school construction. Foam was provided in uniform 4x8x12” blocks and stacked to reach the desired thickness. Foam was trimmed as necessary by the contractor in the field.
El Paso, TX
EPS 39 sheets were stacked to reach a desired thickness and overall elevation by the awarded concrete sub on the construction of this brand new hospital in El Paso, TX. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
Aspen, CO
When the Pitkin County Library in Aspen, CO needed to raise their floor two feet, they went with geofoam as an obvious choice for its lightweight and cost effective characteristics. Foam was provided in uniform 4x8x14” blocks and stacked to reach the desired thickness. Foam was trimmed as necessary by the contractor in the field.
New York City, NY
Various thicknesses of EPS 22 were used on this project to raise the initial slab elevations for a screening room in New York City for the Screen Actors Guild. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
Denver, CO
2” thick insulation boards were supplied to awarded concrete subcontractor for this residential development and the foam they needed to build up the drop slab. EPS 46 was used for his extremely strong and dense characteristics. The project had been specified with extruded polystyrene, however, EPS was used as it was more cost effective for the contractor.
Las Austin, TX
EPS 39 was used here to reduce the weight of the pool deck construction. The project was divided into different sectors and the delivery was coordinated per the contractor’s specific schedule for each area. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
San Marcos, TX
EPS 15 was used to build up the decking level and fill in some various areas around the building needing additional structural support. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
San Diego, CA
This historic renovation project for the Churchill hotel in downtown San Diego utilized EPS on the roof to alleviate additional weight on the existing structure. The foam was provided as precut, tapered blocks to fit to size in the field. Foam was supplied in custom cut sizes and accompanied by a shop drawing for installation. Each piece came numbered and cut to size.
Baton Rouge, LA
High Density foam was used in the conversion of this 60 year old luxury apartment tower in downtown Baton Rouge, LA. As it sits directly on the Mississippi river, foam was used to reduce weight on the existing structure. As this is a historic renovation, the foam was extremely helpful and cost effective.
